BBHub

Here's how to turn a full-length DVD movie into a Pearl movie file

Russell Shaw — 2006-11-03T18:43:00+00:00

Filed under: Tips, Blackberry Multimedia, Developers, Hardware Hacks

On his anxiousdog blog, blogger anxiousdog (didn't I just say that) tells us how to rip a DVD to an .avi file, and then convert it into a video playable on a BlackBerry Pearl. He's actually done it with a movie called Forget Paris.

In this post, I will tell you what anxious dog did, as well as include a detailed description of the DVD to .avi process necessary as a prelude to BlackBerry media conversion.

First, h anxiousdog used a program called SimpleDivX to rip a DVD and convert it into an avi. He links to the instructions but doesn't actually spell them out. That doesn't mean we won't. In fact, we will.

Come along, for directions written by Jinks, screencaps taken by him too and then P-shopped by yours truly.

1. Select the directory in which the burnt VOB files (or entire DVD is). I Select the main movie, note the framerate number and click the next tab (Video).

2. In the video settings, select the right framerate based on the one you saw in the step before. Click enable Video Stream and use 0xE0. Now click Auto Retrieve cropping and select width 640. Leave everything blank in Frame Options. You may want to preview the video, and then click the Audio tab.

3. Click Create Audio. Then select Check Audio and Deselect Extract all Audio. Now on the language drop-down menu it will indentify what languages are available so that you can encode your final product with. Select the one you want (be careful not to select any director's comment track). Now on Audio Format, you can choose AC3 which will keep the best sound possible (6 channels) but will increase the size of the final file (thus meaning it might not fit on a CD-R.) I suggest to use MP3 and change bitrate to 128kbps. You can click on Midnight Mode (which will normalize the audio to 100% and increse sound in places needed throughout the encode). Then click the Codec tab.

4. Click the codec you will like to use. XviD is the best choice. Make sure you select to create a 2-pass video file. It will take more time, but the quality is going to be much better. In the Advance Settings you can make the video of a higher quality but from experience this file will come out larger than a 700mb disc. I normally leave everything blank but you can select Quarter Pixel (which increases the accuracy of micro-blocks within the film). The interlace option can also be used if wanted. On the fourth step screen again, you will see at the bottom Pass Options. I normally do Both passes but if for some reason you want to do a First Pass then after a day do the 2nd pass then this is also possible. Now click at the Compression tab.

5. On the top of the Compression view, make sure you click Enter Final Movie Size. Then Get Time from Movie. In the File Size bar put in 700mb if you want it to fit on one disc, but if you know the movie is very long for example ''The Godfather'' then this will be better spread onto two discs, so choose 1400MB. Now this is where it gets a little complicated. If you place your movie and you have followed everything in this guide and the movie's Bitrate is 700kbps or less, then you can either click at the bottom End-Credicts and click Do Not Include end credits in movie (if available). Another tip is if you are watching a movie and you know there is not much action in it (i.e. Slow Mystery) then click in the Advanced Bitrate Properties (Not Much Action in movie). If your movie is over 740kbps in the Bitrate section then do not worry at all. Now click the Misc. tab.

6. If you want to Create Subtitles using VobSub then click this. It will list all the available languages. Click the one you want (If you are watching the finished movie with Windows Media Player and want to see subtitles, make sure you have the final movie in a folder with the two subtitles) and it will play them. Also make sure you always click AVI as the movie's container. After you do so, click the Project tab.

7. In the project name, call the movie whatever you want (preferably the title of it). Create a temporary folder on your harddrive for SimpleDivX to store unfinished, unsorted data. (tip: make sure you clean this out once in a while because it can get huge in size). Make an output folder for the finished movie. Do NOT click overwrite files and delete temp files when finished because from experience this will tamper with your workflow. Just delete manually and especially problematic if you are doing a lot of jobs. The split total file at feature is great because if you want to put the movie onto two seperate discs, then this will split it at 700mb to be able to fit onto a disc. Deselect if you want oneAVI movie (of whatever size) without a cut. The Batch settings section is very handy as you can place jobs, if you are doing more than one movie, and it will do them all together. Just remember that everytime you click on a job and change something then click Modify so SimpleDivx can understand what you have changed. That's all here, now click the Output tab.

8. This (screen) will basically explain what is going on with the encoding process. If you want to Shut Down the Computer when the encoding process finishes select it. And then START to start the encoding process. And it will begin. The Last tab stated as Setup should be left UNTOUCHED.

OK, now anxiousdog says it took his computer about 1 ½ hours to rip the DVD to a 1.2 gig AVI file. But at that point, anxiousdog was ready to convert the video to a smaller file with a smaller frame size so it would work as a Pearl video file. He hecided to use a program called SUPER for this task.

Let't look at a SUPER screen:

Here's the settings anxiousdog said he used.

+ Output Container = AVI
+ Output Video codec = H.263
+ Aspect can be 11:9, 4:3 or 1:1
+ Frame/sec should be 14.985
+ Bitrate kbps should be 576

Then anxousdog tells us that he performed the following steps:

1. Entered the settings.
2. Right-clicked and specified the output folder destination where he wanted his file to be saved. He created a separate BlackBerry folder for his Pearl-sized movies.
3. Dragged the file into SUPER and hit ENCODE.
4. After the encoding was completed, he went to the output folder and copied the file he just created. The file, originally 1.2 gig, was now 494 MB. "Much more manageable," anxiousdog writes. Ya think?
5. Connected his Pearl to his computer and then pasted the file into the video folder.
6. He now has a BlackBerry movie!

Read | Permalink | Email this | Comments

Let's watch!: man busts up his BlackBerry with bricks and machinery

Russell Shaw — 2006-11-01T18:48:00+00:00

Filed under: 7230, Fun, Hardware Hacks

You Tuber cyberweasel set out one day to break his BlackBerry 7230.

He didn't just place it on the ground and run over with it with his car. No, cyberweasel enlisted the help of bricks and reasonably heavy machinery.

The he put it up on YouTube.

Then I put it up here, with a total of ten screen grabs I think you will want to see. That's the first one at the top of this post

Leaves nine to go.

Come along...

Brick vs. BlackBerry.. choose sides now.

So let's give the brick a flying start. Didn't learn that in Physics class but makes sense to me.

Close up for impact...

Dewwd, you could have done better. Some screen damage and the back is partly blown out but we're far short of obliteration here.

Gravity. Worked for Ike Newton, but we are not talking about an apple. We're still trying to get the brick to bust up the BlackBerry to oblivion. Will the combination of force and bulk work for cyberweasel?

Maybe not. But time to break out the grinder.

A tight squeeze. Pressure, man, pressure.

Gettin' down to it. TNT wasn't available, tho...

OK, how did we do?

Sliced and diced. But how come the keyboard survives?

Anyone got some C4? Just kiddin'

Read | Permalink | Email this | Comments

Mac OS X tethered modem solution for BlackBerry

Russell Shaw — 2006-10-17T15:30:00+00:00

Filed under: Software, Developers, Hardware Hacks

On his blog, Alex King writes that Daniel Pasco has figured out how to use the BlackBerry 870* series as a Bluetooth modem in Mac OS X.

"I've just tested a development build that allowed me to browse the web and download mail," Alex exclaims. "Awesome! Daniel claims the bounty.

The bounty, incidetally, is $675.

Alex adds that Daniel is hard at work polishing it up and quashing the little quirks that exist in the early dev stages of any product, but it already has been tested and works with the 8700g (T-Mobile) and the 8703e (Sprint and Verizon).

Funny, I always thought Pasco was just a city in Washington State.

Read | Permalink | Email this | Comments

How to disassemble a BlackBerry Pearl-lots of pix, too!

Russell Shaw — 2006-09-28T07:25:00+00:00

Filed under: Support, Fun, Pearl 8100, Hardware Hacks

Tom Glogowski from the BlackBerry FAQ and BlackBerryForums.com has alerted me to a newly posted article he's written and illustrated entitled 8100 Disassembly. Link below.

There's instructions, and plenty of pix.

"Please be sure you have the proper tools for this disassembly, as well as a dust free environment you can create," Tom writes. "I recommend that latex gloves be used to prevent fingerprints from showing on the lcd and other visible areas.

Then Tom issues this important warning: be sure to remember the dissasembly steps, as you will need to put it back together once you are done.

OK, now let's get started, shall we?
Step 1:Remove Battery Door.

Step 2: Remove Battery.

Step 3: Remove Bottom Cover
Use the Prying tool, to slowly remove the bottom plastic cover to expose the screws below, unclip the two top clips, and then pull down, this is the most difficult part of disassembly as this piece is very fragile and easy to break. After doing so, unscrew the bottom screws, and the top screws as well (4 in total thus far) .

Step 4: Remove Side Covers
Use the Prying tool once more, remove the side covers, two clips per side, per piece, these are easy to get off, but be very careful to not break the clips.

Step 5: Remove front Cover
With the sides removed, you can now remove the front cover, and expose the lcd and keypad.

Step 6: Remove Rear Cover
This exposes all of the internal workings of the BlackBerry 8100.

Step 7: LCD Removal
The LCD is held on using double sided tape, and seems very thin and flexible. Tom writes that he highly doubt sthat this LCD is user replaceable (at least with ease) like other BlackBerry LCD's are.

Oh, and finally, be sure to wear your Gloves!! This ensures that your LCD is left fingerprint free, and nothing is damaged internally from skin oil. That's what Tom says.

To which I add, that would really suck..

Read | Permalink | Email this | Comments